TVT Intake Tubes

These are the perfect upgrade for the stock plastic tubes.  They are 3" aluminum and come in natural or powdercoated black. 

These can be used with your existing SL55 intake or by themselves to make your own custom intake.

Comes with all clamps and couplers for a direct fit.

ASP 178mm Pulley

So what exactly does a bigger pulley do?  Add more boost!  And what does more boost equal?  More Power! 

The 178mm pulley has been proven time and time again as the most reliable and most efficeint pulley for the M112k.  Bigger pulleys cause extra heat and extra stress on the engine, often resulting in ruined idler pulleys or water pumps.  Do you want to be stuck on the side of the road cause your 185mm pulley blew your other pulleys up?  I didn't think so.

On a bone stock car you can expect 25RWHP.  When matched with an intake and tune you can see upwards of 75-80RWHP.

The stock Bosch pumps are known to fail on a regular basis.  If you have ever stepped on the gas and thought you were driving a 4cyl then your pump has probably failed.  Why replace with another ready to fail stock pump when you can add a pump that flows 300% more then stock and will last substantially longer. 

A perfect addition when adding an 178mm Pulley.

PRICE:  $175.00 shipped

SL55 Intake and ASP Pulley Combo

For the ultimate bolt on upgrade, we offer our Intake/Pulley combo.  This kit will drastically increase HP and TQ and will make your car a force to be reckoned with. 
This combo will add approximately 50RWHP with no other mods.
Add an intercooler pump for the coolest, strongest intake charge your car can handle!

We are proud to offer our machining service for the stock SC pulley.  By machining down the pulley we are able to increase boost without unnecessary stress on the accessories.  If you already have a crank pulley we can machine down the top pulley for any desired size in order to add just the amount of boost you desire.

We recommend not machining smaller then 69mm.  If you would like to go smaller a new bearing will need to be installed to avoid over revving the stock bearing. 

Please call with your exact needs.

PRICE:  starting at $375.00

The single biggest hinderance on squeezing performance out of these cars is the fuel system.  We have had numerous customers running stacked pulleys or ported manifolds and constantly running lean.  The best way to solve this is to increase the fuel to the injectors.

The SL55 pump flows 50% more fuel then the stock pump and will support even the most fuel hungry of cars.  You can run stacked pulleys, full exhaust, and ported manifolds and still not worry about putting a whole in a piston.

This is a direct bolt in part with ZERO modifications needed.

PRICE:  $450.00 shipped

Our upgraded injectors flow 20% more fuel then the stock injectors and are a perfect addition to the SL55 fuel pump or as a stand alone fuel upgrade.

These injectors are made of the high quality parts our other injectors are made from.  The offer then newest technology for quiet and efficeint fuel delivery.

These injectors require manifold spacers as they are slightly taller then stock.  The spacers are the Code 3 spacers and since they are no longer manufactured these injectors will be sold in limited quantities.

Each set of injectors comes with 2 spacers, new bolts, new couplers, and new gaskets.

PRICE:  $599.00 shipped

This is the ultimate upgrade in fuel for your car.  You've increased boost with a pulley, increased air supply with an intake and ported manifolds, so why are you neglecting your fuel system?

Our Total Fuel Upgrade includes both the SL55 pump and our Upgraded Injectors and all necessaary hardware.

PRICE:  $900.00 shipped